Dinosaur Gembone & Petrified Wood Care
How to Care For and Clean Dinosaur Gembone & Petrified Wood Carvings
Dinosaur Gembone (agatized dinosaur bone) and Petrified Wood share the exact same fossilization process—permineralization—in which original organic tissue (cellular bone webbing or ancient wood grain) was gradually replaced over millions of years by microcrystalline quartz (chalcedony), agate, and jasper. Because both stones are preserved in solid silica, they sit at 6.5 to 7 on the Mohs hardness scale, take a vibrant, glass-like polish, and follow identical care rules. Treating them properly will protect their intricate prehistoric patterns for generations.
1. Routine Cleaning (Lukewarm Water & Mild Soap)
Fully silicified gembone and petrified wood are durable and water-safe for gentle routine cleaning, though natural micro-pores or unpolished bark edges require a light touch:
How to wash: Gently clean your carving using lukewarm water, a drop of mild dish soap, and a soft microfiber cloth. If dust settles into carved grooves, bone cell pits, or wood grain textures, use a very soft-bristled brush (like a baby toothbrush), then rinse well and pat dry immediately with a lint-free towel.
Skip ultrasonic and steam cleaners: Even though both stones are quartz-hard, they are composed of countless fossilized cells, growth rings, and mineral veins. Intense ultrasonic vibrations or sudden thermal shock from steam cleaners can exploit natural fracture lines or loosen tiny crystal pockets.
2. Avoid Harsh Chemicals, Acids & Extreme Heat
No chemical cleaners: Never use bleach, ammonia, acetone, or abrasive household cleaners. While pure quartz resists most acids, both gembone and petrified wood often contain trace calcite, iron oxide, or manganese within their cell walls and growth rings that can dull or etch when exposed to harsh chemicals.
Remove before swimming or soaking: Take off pendants before entering chlorinated pools, saltwater, or hot tubs, and apply lotions, sunscreens, or perfumes before putting on your jewelry so oils do not build up inside natural micro-pores.
Limit prolonged direct sunlight: Although their natural mineral colors are generally stable, leaving a carving in intense, direct windowsill sunlight for months or years can gradually fade delicate hues.
3. Prevent Drops and Scratches
Sitting at 6.5 to 7 on the Mohs hardness scale, both stones resist everyday scratching well, but like agate and jasper, they are brittle and can chip if dropped sharply onto a hard surface:
Handle over soft surfaces: Always put on or take off necklaces over a carpeted floor, bed, or soft towel rather than over tile floors or stone countertops.
Store separately: Keep your carvings in individual soft pouches or lined compartments. Quartz-hard gembone and petrified wood will easily scratch softer stones (like turquoise, opal, or Picasso marble), while harder gemstones (like sapphire or diamond jewelry) can scratch their polished finish.
4. Cord & Metal Setting Care
Cords: If your carving is strung on a waxed polyester or nylon cord, avoid soaking the cord excessively when washing the stone. If the cord eventually feels dry after months of wear, lightly rub natural beeswax along the fibers (avoiding the stone) and warm it in with your fingers to restore its smooth, water-resistant finish.
Gold & Silver Accents: For carvings set in sterling silver or gold, use a dry anti-tarnish jewelry polishing cloth on the metal portions only, taking care not to rub abrasive metal-polishing compounds onto the stone's surface.
Quick Care Reference by Fossil Stone
| Fossil Stone | Key Features to Watch For | Best Cleaning & Care Method |
|---|---|---|
| Dinosaur Gembone | Cellular webbing & tiny natural vugs (Mohs 6.5–7) | Lukewarm soapy water & soft cloth; strictly avoid ultrasonic cleaners |
| Petrified Wood | Silicified growth rings & occasional rough bark edges (Mohs 6.5–7) | Mild soapy water & soft brush; dry thoroughly; avoid harsh impacts |